| Technical
Information
The Ultimate Deterrent!
The VOX SENTRY has been designed
to detect the movement of people or vehicles within restricted
areas by using the latest solid-state voice technology; to
deliver up to THREE intelligently sequenced messages. Following
the third and final message a siren output can be activated
and a further three independent relay outputs are provided
which can be connected to security lighting, CCTV, existing
intruder alarm system, wireless modem or central monitoring
point to deter unauthorised access by intruders.
Cause for Alarm!
It has been proved that verbal warnings are
taken more seriously than conventional sirens and bells and
although intruder alarm systems are effective, they only concentrate
on protecting the property once the burglar has forced entry.
Compliments any existing intruder alarm and
CCTV system!
The Sentry compliments any existing intruder
alarm or CCTV system and allows the security installer to
gain an advantage over his competitors by offering a VOX SENTRY
system as an inexpensive optional extra.
Installation Format
The Sentry is supplied as a PCB, which can be
fitted within most alarm control panels, or as a complete
control panel assembly including power supply unit with security
lighting controller.
Applications
*Schools * Offices * Garages * Forecourts *
Car Parks * Public Places * Restricted Areas * Warehouses
* Shops * Gardens * Garden Centres * Petrol Stations * Vending
Machines * Exhibitions *
VOX SENTRY – TECHNICAL SPECIFICATION
Operating Voltage: 12v DC
Arming Timer Adjustment: 15 seconds to 7
minutes (Resetting upon each detection)
Total message talk time: 60
seconds
Amplifier output: 5W RMS @
8 ohms (20W peak)
Siren output: 12v DC 300ma
Relay switching capacity: 1
amp @24v DC
POWER SUPPLY UNIT – TECHNICAL SPECIFICATION
Operating voltage: 115 /230v
AC (configurable) AC
50/60 Hz
Switching capacity: 6.3 Amp
(1.5 KW @ 240v AC)
Low voltage output: 12v DC
@ 500ma Max.
Max Battery Charging Capacity:
12v DC @ 2.8AH
VOX SENTRY VERBAL ANNOUNCEMENT SYSTEM
- Microprocessor EPROM non- volatile Solid State
Voice Technology
- Reproduces THREE natural voice messages up to
a total talk time of 60 seconds Intelligent sequential announcement
system with adjustable inhibit timer
- Simple record announcement facility using on
board microphone with over-run LED indicator light
- Activated by PIR detectors, magnetic switches,
vibration sensors etc.
- A powerful 5W RMS @ 8 ohms (20W Peak) speaker
output.
- Adjustable volume control
- Three independent Relay outputs to provide numerous
system design facilities, such as connection to security lighting,
auto-dialler or existing alarm system
- Arm / Disarm / Panic function by either relay
contact or remote control
- Adjustable ‘Arming@ delay timer from 15 seconds
to 7 minutes
- Audible Arm/ Disarm tones
- 12v Siren / Strobe output energises following
third and final message
- Battery back – up facility available Power supply
unit Link selectable operating voltage between 115 AC (continental)
and 230v AC (UK)
|
